/* The error line below is here to satisfy RFC requirements: We cannot
 * distribute code that has non-standard protocol numbers built in as
 * defaults.  So you must read this and understand that you are running
 * a non-compliant, experimental code version.  When you agree, please
 * change the error directives to warnings -- then, the code will build.
 *
 * Sincerely, Rick van Rein, OpenFortress.
 */

// #error "Build uses experimental Neighbor Discovery Option Type 253 for Destination Link-Layer Address"

#define ND_OPT_DESTINATION_LINKADDR 253


// #error "Build uses experimental UDP port number 25790 or 0x64be"

#define UDP_PORT_6BED4 25790


#warning "Build uses temporary IPv4 address information"

#define SERVER_6BED4_IPV4_TXT			"145.136.0.1"
#define SERVER_6BED4_IPV4_INT32			( (145L << 24) | (136L << 16) | (0L << 8) | 1L )
#define SERVER_6BED4_IPV4_INT0			145
#define SERVER_6BED4_IPV4_INT1			136
#define SERVER_6BED4_IPV4_INT2			0
#define SERVER_6BED4_IPV4_INT3			1
#define SERVER_6BED4_IPV4_BINSTR		"\x91\x88\x00\x01"

#define SERVER_6BED4_PORT_TXT			"25790"
#define SERVER_6BED4_PORT_BINSTR		"\xbe\x64"

#define SERVER_6BED4_IPV4_PORT_TXT		"145.136.0.1:25790"
#define SERVER_6BED4_PORT_IPV4_ADDRSTR		"\xbe\x64\x91\x88\x00\x01"
#define SERVER_6BED4_PORT_IPV4_MACSTR		"\xbe\x64\x91\x88\x00\x01"

/* Define LOCAL_OVERRIDES_PORT0 to forcefully detect 6bed4 port 0 as an
 * override to a local address.  This is used when a host uses its own /64
 * and has no other addresses available.
 */
#define LOCAL_OVERRIDES_PORT0 yes

/* Possibly override the name of the interface from the default "6bed4"
 */
// #define INTERFACE_NAME_6BED4 "6bed4"