+++ /dev/null
-/* The error line below is here to satisfy RFC requirements: We cannot
- * distribute code that has non-standard protocol numbers built in as
- * defaults. So you must read this and understand that you are running
- * a non-compliant, experimental code version. When you agree, please
- * change the error directives to warnings -- then, the code will build.
- *
- * Sincerely, Rick van Rein, OpenFortress.
- */
-
-#error "Build uses experimental Neighbor Discovery Option Type 253 for Destination Link-Layer Address"
-
-#define ND_OPT_DESTINATION_LINKADDR 253
-
-
-#error "Build uses experimental UDP port number 27629 or 0x6bed"
-
-#define UDP_PORT_6BED4 25788
-
-
-#warning "Build uses temporary IPv4 address information"
-
-#define SERVER_6BED4_IPV4_TXT "145.100.190.242"
-#define SERVER_6BED4_IPV4_INT32 ( (145L << 24) | (100L << 16) | (190L << 8) | 242L )
-#define SERVER_6BED4_IPV4_INT0 145
-#define SERVER_6BED4_IPV4_INT1 100
-#define SERVER_6BED4_IPV4_INT2 190
-#define SERVER_6BED4_IPV4_INT3 242
-#define SERVER_6BED4_IPV4_BINSTR "\x91\x64\xbe\xf2"
-
-#define SERVER_6BED4_PORT_TXT "25788"
-#define SERVER_6BED4_PORT_BINSTR "\xbc\x64"
-
-#define SERVER_6BED4_IPV4_PORT_TXT "145.100.190.242:27629"
-#define SERVER_6BED4_PORT_IPV4_ADDRSTR "\xbe\x64\x91\x64\xbe\xf2"
-#define SERVER_6BED4_PORT_IPV4_MACSTR "\xbc\x64\x91\x64\xbe\xf2"
-
-/* Define LOCAL_OVERRIDES_PORT0 to forcefully detect 6bed4 port 0 as an
- * override to a local address. This is used when a host uses its own /64
- * and has no other addresses available.
- */
-#define LOCAL_OVERRIDES_PORT0 yes