Additional file with definitions of ports and IPs

diff --git a/nonstd.h.in b/nonstd.h.in
new file mode 100644 (file)
index 0000000..10df73e
--- /dev/null
+++ b/nonstd.h.in
@@ -0,0 +1,36 @@
+/* The error line below is here to satisfy RFC requirements: We cannot
+ * distribute code that has non-standard protocol numbers built in as
+ * defaults.  So you must read this and understand that you are running
+ * a non-compliant, experimental code version.  When you agree, please
+ * change the error directives to warnings -- then, the code will build.
+ *
+ * Sincerely, Rick van Rein, OpenFortress.
+ */
+
+#error "Build uses experimental Neighbor Discovery Option Type 253 for Destination Link-Layer Address"
+
+#define ND_OPT_DESTINATION_LINKADDR 253
+
+
+#error "Build uses experimental UDP port number 27629 or 0x6bed"
+
+#define UDP_PORT_6BED4 25788
+
+
+#warning "Build uses temporary IPv4 address information"
+
+#define SERVER_6BED4_IPV4_TXT                  "145.100.190.242"
+#define SERVER_6BED4_IPV4_INT32                        ( (145L << 24) | (100L << 16) | (190L << 8) | 242L )
+SERVER_6BED4_IPV4_INT0                         145
+SERVER_6BED4_IPV4_INT1                         100
+SERVER_6BED4_IPV4_INT2                         190
+SERVER_6BED4_IPV4_INT3                         242
+#define SERVER_6BED4_IPV4_BINSTR               "\x91\x64\xbe\xf2"
+
+#define SERVER_6BED4_PORT_TXT                  "25788"
+#define SERVER_6BED4_PORT_BINSTR               "\xbc\x64"
+
+#define SERVER_6BED4_IPV4_PORT_TXT             "145.100.190.242:27629"
+#define SERVER_6BED4_PORT_IPV4_ADDRSTR         "\xbe\x64\x91\x64\xbe\xf2"
+#define SERVER_6BED4_PORT_IPV4_MACSTR          "\xbc\x64\x91\x64\xbe\xf2"
+